Step 9, Install Framed Panels - GE ZIC360NXDLH Installation Instructions Manual

Installation Instructions
I STEP 9 ]INSTALL 1/4" FRAMED PANELS
Right hand models shown. Use the same instructions
for left hand models.
IF YOU ARE INSTALLING OVERLAYPANELS,
GO TO STEP9A.
/'
/'
',\ / Use Front Hol,
_\ " to Secure Trh_
...... -............ \ UseRear Holes
to Secure Handle
Door Trim
Refrigerator
Door
k\,\\\\\\\\\\\\\\\\\'\\\/
Standard supplied handle shown
in 1/4" panel position,
i i
Install door and drawer panels:
, Open door to 90 ° , Remove the 4 Phillips head screws
from the door handle,
, Remove handle, Retain all screws,
, Remove 4 screws holding trim, lift off trim,
Retain screws,
, Slide framed panel into the door trim,
, There are two sets of holes in the handle side trim,
Replace handle side trim by installing the original screws
in the FRONT screw holes,
, Secure the handle to the door using the REAR screw
holes,
, Follow the same procedures to install the drawer panel,
15