Monogram ZV48R Installation Instructions Manual page 2

Safety Information
READ AND SAVE THESE INSTRUCTIONS
BEFORE YOU BEGIN
Read these instructions completelg and carefullg.
"IM PORTANT- Save these instructions for
local inspector's use.
"IM PORTANT- Observe
all
governing
codes
and ordinances.
, Note to Installer - Be sure to leave these
instructions with the Consumer.
. Note to Consumer - Keep these instructions
with gour Owner's Manual for future reference.
,
Skill Level
-Installation of this appliance requires
basic mechanical and electrical skills.
. Completion Time - Z to 3 Hours.
. Proper installation is the responsibilitg of the installer.
Product failure due to improper installation is not
covered under the warrantg.
For Monogram local service in gour area, call 1.800.444.1845.
For Monogram service in Canada, call 1.800.561.3344.
For Monogram Parts and Accessories, call 1.800.626.2002.
_CAUTION:
Due to the weight and size of these vent hoods and
to reduce the risk of personal injur U or damage to the
product, TWO PEOPLEARE REQUIREDFOR PROPER
INSTALLATION.
AWARNING:
To reducetherisk o ffire o relectrical shock, do not
usethis range hood withang external s olid-state speed
control d evice. A n U such alteration from original factor U
wiring could result i n damage totheunit and/orcreate
an electrical safetg hazard.
TO REDUCE THE RISK OFFIRE, U SEONLYMETAL DUCTWORK.
WA RN I N G:ToREDUCE THE R ISK
OF
FIRE,ELECTRICALSHOCK OR INJURYTO PERSONS,
OBSERVETHE FOLLOWING:
A. Use this unit onlg in the manner intended
b Uthe manufacturer. If gou have ang questions, con-
tact the manufacturer.
B.
Before servicing or cleaning the unit, switch
the power off at the service panel and lock the service
disconnecting means to prevent the power from
being switched on accidentallg. When the service dis-
connecting means cannot be locked, securelg fasten
a prominent warning device,
such as a tag, to the service panel.
ACAUTION:
FOR G ENERAL VENTILATING
USE ONLY. DO NOT USE TO EXHAUST HAZARDOUS
MATERIALS,EXPLOSIVEMATERIALS OR VAPORS.
WA RN IN G: TO REDUCE THE R ISK
OF
FIRE, ELECTRICALSHOCK OR INJURYTO PERSONS,
OBSERVE THE FOLLOWING:
. Installation work and electrical wiring must be done
bg qualified person(s)in accordance with all applicable
codes and standards, including fire-rated construction.
. Sufficient air is needed for proper combustion
and exhausting of gases through the flue (chimneg)
of fuel burning equipment to prevent back-drafting.
Follow the heating equipment manufacturer's guide-
lines and safetg standards, such as those published
bg the National Fire Protection Association (NFPA),the
American Societg for Heating, Refrigeration and Air
Conditioning Engineers (ASHRAE) and the local code
authorities. When applicable, install ang makeup
(replacement) air sgstem in accordance with local
building code requirements. Visit GEAppliances.com
for available makeup air solutions.
When cutting or drilling into walls or ceilings, do not
damage electrical wiring and other hidden utilities.
Ducted sgstems must alwags be vented
to the outdoors.
Local codes varg. Installation of electrical connections
and grounding must complg with applicable codes.
In the absence of local codes, the vent should be
installed in accordance with National Electrical Code
ANSI/NFPA70-1990 or latest edition.
ACAUTION:
To reducerisk o f fire a nd to
properlg exhaust air, be sure to duct air outside-do not
vent exhaust air into spaces within walls or ceilings or
into attics, crawl spaces or garages.
49 80152 7