Removing Jammed Documents - Fujitsu Fi-718PR Operator's Manual

9. Close the print cartridge cover.
10. Turn on the scanner.
11. Reset the ink counter.
ATTENTION
Make sure to reset the ink counter after replacing the print
cartridge.
Select the [Start] menu → [All Programs] → [fi Series] →
[Software Operation Panel] (for Windows 2012 or
Windows 8, right-click the Start screen, and click [All
apps] on the app bar → [Software Operation Panel] under
[fi Series]).
The [Software Operation Panel] dialog box
appears.
From the listing on the left, select [Device Setting].
Click the [Clear] button for the remaining ink.
The counter is set to "100".
Click the [OK] button on the [Software Operation Panel]
dialog box.
A message appears.
Click the [OK] button.
The settings are saved.
10 |

3.5. Removing Jammed Documents

When a paper jam occurs, remove the document in the
following procedure.
ATTENTION
Do not use force to pull out the jammed document.
1. Remove all documents from the ADF paper chute
(feeder).
2. Open the print section by pulling it from the right
side.
ATTENTION
Make sure to open the print section before opening the ADF.
3. Open the ADF.
ADF
Print section
4. Remove the jammed document.
5. Close the ADF.
ADF
Print section