Mounting And Removing The Tractor Unit - Fujitsu DL7400Pro User Manual

SETTING UP
Guide pin
2-10

Mounting and removing the tractor unit

Tractor unit at the front
[Removing the tractor unit]
Raise the paper table. While pressing the lock levers of the tractor
frames located on both sides of the tractor unit, lift out the tractor
unit to remove it.
Lock lever
[Mounting the tractor unit]
1) Position the U-shaped slots on both sides of the tractor unit over the
guide pins of the printer unit. (To set the tractor unit in position, line
it up with the groove of the left guide pin. The right guide pin has
no groove).
2) Push down the shaft at the front of the tractor unit until it locks with
an audible click. (Do not press the lock levers when pushing down
the shaft.)
U-shaped slot
Tractor unit
Paper table
Lock lever
Guide pin
U-shaped slot
User's Manual