Loading The Print Cartridge - Fujitsu Fi-718PR Operator's Manual

5. Turn the locks inwards.
6. Connect the EXT cable to the connector on the
back of the scanner.
ATTENTION
The imprinter does not work if the EXT cable is not
connected. Scanning without the EXT cable connected will
cause paper jams inside the imprinter.
7. Attach the stacker (removed in step 2) on the front
of the imprinter.
8. Connect the power cable to the scanner.
4 |
① Insert one arm.
② Gently slide in the other arm.

2.2. Loading the Print Cartridge

Load the print cartridge in the following procedure.
ATTENTION
When installing or replacing the print cartridge, be careful not to
insert it out of place.
1. Turn off the scanner.
2. Open the print cartridge cover.
Paper guides
3. Remove the packing tape from the print cartridge
holder and the paper guides.
4. Open the print cartridge holder by pinching and
lifting up its locking lever with your fingers, as
shown below.
5. Take out a new print cartridge.
6. Remove the protective tape from the print
cartridge.
ATTENTION
Do not touch the metal part of the cartridge nor put the protective
tape back on.
Print cartridge holder