Download  Print this page

Advertisement

Advertisement

   Also See for Fujitsu fi-590PRF

   Summary of Contents for Fujitsu fi-590PRF

  • Page 2: Table Of Contents

    Contents Introduction ..............................1 1. Preparations ............................5 1.1 Names of Component Parts .......................... 5 2. Basic Operations ............................ 6 2.1 Installing the Print Cartridge ........................6 2.2 Operating Test ............................... 7 2.3 Positioning the Print Cartridge ........................8 2.4 How to Use the Paper Guide ......................... 9 2.5 Print Setup ..............................

  • Page 3: Introduction

    Introduction Thank you for purchasing the fi-590PRF Imprinter How Trademarks Are Indicated In This option for fi-5900C/fi-5950 Color Image Scanner. This guide explains how to install and use the imprinter. Manual (For further details about the functions and operations of fi-5900C/fi-5950 Image Scanner, refer to the “fi-5900C...

  • Page 4: Regulatory Information

    Regulatory Information Bescheinigung des Herstellers / Importeurs FCC declaration Für den fi-590PRF wid folgendes bescheinigt: In Übereinsstimmung mit den Bestimmungen der • This equipment has been tested and found to comply EN45014(CE) funkentstört with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

  • Page 5

    AC outlet. It may also include the drawing of the specific Then, contact your FUJITSU scanner dealer or an instruction. authorized FUJITSU scanner service provider. Pay particular attention to this warning in households where there are small children.

  • Page 6

    The power cable does not have any cracks or where small children may be able to reach. scratches. If any abnormality is detected, contact your FUJITSU Before moving the scanner, be sure to disconnect scanner dealer or an authorized FUJITSU scanner the power cable from the AC outlet, and all other service provider.

  • Page 7: Preparations

    1. Preparations 1.1 Names of Component Parts Open the Imprinter cover to see Imprinter (fi-590PRF) which is installed in the scanner (fi-5900C/fi-5950). Imprinter head Imprinter cover <Inside of Imprinter Cover> Print cartridge holder fi-590PRF Imprinter Operator’s Guide | 5...

  • Page 8: Basic Operations

    2. Basic Operations Open the imprinter cover. 2.1 Installing the Print Cartridge Mount the print cartridge as follows: Imprinter cover When installing or replacing the print cartridge, be ATTENTION careful not to insert it out of place. Confirm that the scanner is turned off. Hold the center of the upper part of the hopper.

  • Page 9: Operating Test

    Press [Scan] button to test. Paper will feed into the Hopper, and the Imprinter will print out the Print Test Characters starting at 5mm (±4mm) from the paper’s edge. 11. Close the imprinter cover. fi-590PRF Imprinter Operator’s Guide | 7...

  • Page 10: Positioning The Print Cartridge

    2.3 Positioning the Print Cartridge HINT Print test patterns To Position the print cartridge for printing: Test pattern 1 (Horizontal): ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`0000 Open the imprinter cover. 0000 Test pattern 2 (Horizontal): abcdefghijklmnopqrstuvwxyz{|}~ 00000000 Imprinter cover Test pattern 3 (Horizontal): !”#$%&'()*+,-./0123456789:;<=>?@00000000 Test pattern 4(Vertical): ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`0000 0000 Test pattern 5 (Vertical):...

  • Page 11: How To Use The Paper Guide

    [Disable] To Remove the Paper Guide When both the Pre-Imprinter and the As shown below, hold the Paper Guide and pull upward to Post-Imprinter are installed: unhook it. ● [Disable] ● [Pre-Imprinter] ● [Post-Imprinter] fi-590PRF Imprinter Operator’s Guide | 9...

  • Page 12: Replacing The Print Cartridge

    Turn the blue lever toward left and open the 2.6 Replacing the Print Cartridge cartridge holder. Make sure that you turn off the scanner power and unplug the power cable from the outlet. CAUTION If the cartridge replacement is done with power turned on, it may cause electric shock or imprinter failure.

  • Page 13

    If the [Software Operation Panel] is password protected, enter the password to cancel the View Only mode. (fi-5950 only) Click the [Clear] button at the [Remaining Ink (Pre)] button. The Ink remain counter will reset to 100%. fi-590PRF Imprinter Operator’s Guide | 11...

  • Page 14: Daily Care

    3.2 Cleaning the Imprinter Poor quality prints can occur due to blocked ink emission As the fi-590PRF prints the number on a document before holes in the nozzle. Leaving the imprinter unused for long reading operation, ink can spatter over the glass and paper periods can also cause emission holes to become blocked.

  • Page 15

    Press the ADF cover until it is fixed. ● When closing the ADF, be sure nothing is left inside of the ADF. CAUTION ● Be careful not to pinch your fingers. Glass of the Upper Transport path transport unit fi-590PRF Imprinter Operator’s Guide | 13...

  • Page 16: Error Messages

    FUJISTU scanner service provider.) Description: The imprinter fuse has blown out. How to solve: Contact the store where you purchased the scanner, or contact an authorized FUJITSU scanner service provider. 14 |...

  • Page 17: Specifications

    ATTENTION coated paper, and art paper take longer time for the ink to dry and may cause poor print quality. The imprinter must be cleaned more frequently if you use these types of papers. fi-590PRF Imprinter Operator’s Guide | 15...

  • Page 18

    Item Specification Printing area Reference Head movable range Point Unit: mm * The document stains with ink when printing in the shaded areas (shown in the illustration). Therefore, correct printing operations in such areas are not guaranteed. Character position Vertical: ±4mm (at reference position) accuracy Horizontal: ±4mm (at reference position) Ambient condition...

Comments to this Manuals

Symbols: 0
Latest comments: