Cleaning; If Something Doesn't Work - AVM inspiration C6m Operating Instructions Manual

6. Cleaning

Use a soft cloth and normal glass cleansing fluid.
CAUTION: Make sure that no fluid comes into the unit. Do not use scouring cleaners. They may
damage the surface.

7. If something doesn't work.......

Some putative defects are often caused by mistakes in operation. Sometimes other units connected to the
amplifier can cause problems. Therefore please read the following tips before You consult Your dealer or us.
1. Amplifier is muted
a) Mute function is active, press button MUTE (vol/pol>) on remote control or increase volume using the
rotary encoder (14)
b) MONITOR function is activated. Switch monitor off.
c) PROCESSOR function is activated. Switch processor off.
d) Inadvertent switching to standby by remote control. Press power button (1). If the LED indicator and
display do not light up a fuse can be blown due to overvoltage (thunderstorm). Please contact Your
dealer.
2. Amplifier switches off during normal operation
This can happen if the temperature inside the unit becomes too high. In this case the amplifier switches off
and the display shows "overheat". Switch the unit off and let it cool down for five minutes.
If the Display shows "overload" please check if there is a short circuit in the speaker cables. Switch the unit
off by pressing power button (1) remove the short circuit and switch again on.
3. Hum
a) Hum while playing records: Make sure that the chassis of Your record player is properly grounded.
4. Infrared remote control doesn't work
a) Check the batteries of Your remote control transmitter
b) Point with the remote control transmitter directly to the unit.
15