Page 3
Declaration of conformity (for EC only) We herewith confirm, that the unit to which this manual belongs fulfills the EC rules necessary to obtain the sign the necessary measurements were taken with positive results. AVM Audio Video Manufaktur GmbH Daimlerstraße 8 D-76316 Malsch Germany www.avm.audio...
Page 4
CD 6.2 in the optimal way. Please note that the range of functions of your AVM hifi component can be easily expanded by means of a software update at any time. Hence, the present operating instructions will require continued updates going forward.
Table of contents Getting started ........................6 What’s in the box? ......................6 Control and operating elements ..................6 Installation and cooling ....................7 Connection to mains ....................... 7 Connection to a preamplifier or integrated amplifier ............8 Connection of digital signal sources ................8 RC 3 remote control ......................
1 Getting started 1.1 What’s in the box? OVATION CD 6.2 • RC 3 remote control • Power cable • CAUTION: After unpacking, please check the scope of delivery to ensure that all parts have been supplied and are undamaged. In case the original packing has already been opened, please contact your local dealer.
1.5 Connection to a preamplifier or integrated amplifier Connect the analogue outputs (16-19) to the high-level inputs of a preamplifier or integrated amplifier. The RCA-cinch outputs and the balanced XLR outputs are fully decoupled from each other and can be used independently. 1.6 Connection of digital signal sources Digital signal sources Connect the outputs of your digital sources to the corresponding inputs of the CD 6.2:...
1.7.1 Battery change Bottom view RC 3 remote control Unscrew the 6 marked screws (CAUTION: Do NOT unscrew the 2 unmarked screws in the middle). Take the bottom plate with the mounted pcb out. Remove the worn batteries and replace them with two new batteries (type CR2032, 3V Lithium cells). Make sure that polarity is correct (the "+"...
2 Basic operation 2.1 First operation / self test In case the CD 6.2 was not connected to mains a self test will be performed when it is switched on by the mains switch (29) for the first time. The unit will check its configuration and that all the installed components work properly.
PROG In case of a currently active track programming both the currently playing track and the total number of programmed tracks is displayed on the left-hand side (for example "PROG 2/17"). In case the random play mode is activated, the currently playing track and the total number of programmed tracks are displayed on the left-hand side (for example "RND 5/12").
Page 12
2.4.3 CD playback If a disc is inside playing is started by pressing the PLAY button (12). If you press PAUSE (11) the unit will go into the pause mode until PLAY (12) or STOP (10) is pressed. The actual state (PLAY, PAUSE, STOP) is shown on the display (8). Furthermore, the display shows the actual playing time, the actual title number and the total number of titles.
2.4.7 Programming an individual playlist (example) The CD inside the player contains 15 titles. You want to play only titles 7, 3 and 8. Press PROG (4) and the PLAY (12). The display now shows "PGM-QTY 00" and • “TRCK 1/15”. Select title 7 using the Option keys (2,3).
Bit (PCM) without the need to install an audio driver on your Mac. If you are using a Windows PC you will need to install an additional driver which is available for download on the respective product page at www.avm.audio. Below the LO RES and HI RES indication, the currently active data format is shown on the display (PCM or DSD).
3 Advanced Settings 3.1 Personal Setup The personal setup offers a range of settings to individualize the CD 6.2 according to your personal needs. To enter the personal setup menu, please switch off your device on the rear of the unit at the mains switch (29). Keep the PROG button pressed (4) while you switch on the unit again (29).
3.1.3 Set autoplay When AUTO PLAY is activated, the CD player will start playing automatically every time a CD is inserted. IF AUTO PLAY is deactivated, the player will read the TOC (table of contents) of the inserted disc and then go to STOP mode. 3.1.4 skip unused inputs Unused inputs can be deactivated (SKIPPED).
4 Appendix 4.1 Cleaning Use a soft cloth and normal glass cleansing fluid. CAUTION: Make sure that no fluid comes into the unit. Do not use scouring cleaners. They may damage the surface. 4.2 Troubleshooting Some putative defects are often caused by mistakes in operation. Sometimes other units connected to the amplifier can cause problems.
Page 18
Provisions for this warranty are: The unit must have been purchased from an authorised dealer. Equipment from other • sources will not be repaired, not even at charge. The warranty registration card, together with a copy of the bill of sale, must be received •...