Menu System; Playmode; Repeat; Random - AVM inspiration C6m Operating Instructions Manual

4. Menu system

The inspiration C6m offers a lot of custom specific settings in it's menu system. To enter the menu just tip on
the button MENU (6). The button now changes to EXIT. A second tip on this button leads You to the normal
operating mode. When the menu system is active You can select the desired function using the parameter-
buttons PARM (4, 5). The setting is done using the buttons VALUE (7, 8).
Depending on the actual source the menu system offers the following settings:
4.1 Playmode (CD must be selected as source)
In case You have programmed a playlist You can choose if the titles are played according to the playlist
("program") or "as CD".
4.2 Repeat (CD must be selected as source)
Choose repeat mode: "one" (actual title), "all" (whole CD or programmed sequence), "off".
4.3 Random (CD must be selected as source)
Titles are played in random sequence.
4.4 Tuner mode DAB / FM (tuner must be selected as source)
Choose the reception mode.
4.5 RDS-Display (tuner must be selected as source)
Choose if station name ("station") or RDS text ("text") is displayed.
4.6 Scanmode (tuner must be selected as source)
Set tuning mode between "auto" or "manual". (See also 3.5.1 tuning)
4.7 Mode (tuner must be selected as source)
For FM reception only: Set tuner to mono or stereo to obtain best sound.
4.8 DAB antenna (tuner must be selected as source)
Select the antenna socket used for DAB: "1" = lower socket (20),"2" = upper socket (20a, default)
4.9 FM antenna (tuner must be selected as source)
Select the antenna socket used for FM: "1" = lower socket (20, default),"2" = upper socket (20a)

4.10 Tone

Set tone control to "bypass" (= linear) or "active". In case the tone control is activated a note symbol is
shown in the display (3).

4.11 Bass

Set bass level between –12.5 and + 12.5.

4.12 Treble

Set treble level between –12.5 and + 12.5.
12