Table of Contents
Advertisement
Pressing the STOP button (10) will bring the unit back to normal operating mode without
resetting any item (CANCEL).
4 Appendix
4.1 Cleaning
Use a soft cloth and normal glass cleansing fluid. CAUTION: Make sure that no fluid comes
into the unit. Do not use scouring cleaners. They may damage the surface.
4.2 Troubleshooting
Some putative defects are often caused by mistakes in operation. Sometimes other units
connected to the amplifier can cause problems. We therefore kindly ask you to read the
following tips before consulting your dealer or us.
1. No playback
a) Mute function is active, press button MUTE on your remote control or increase the
volume using the rotary encoder (11).
b) Inadvertent switching to stand by. Press power button (1). If the LED indicator and display
do not light up a fuse can be blown due to overvoltage (e.g. in case of a thunderstorm
etc.). Please contact your dealer.
4. RC 9 remote control doesn't work
a) Charge the included lithium-ion battery of the optionally available RC 9 remote control
(see section Error! Reference source not found.).
b) Point with the remote control transmitter directly to the unit.
c) Reconnect the RC 9 remote control with your device. This process is also referred to as
Pairing. In order to start the pairing process, please follow the instructions as described
in section Error! Reference source not found..
5. The display shows „no disc", although a CD is inserted
a) Please make sure the CD is not a data disc, has not been damaged and is inserted with
the correct side facing up
b) Please clean your CD with a soft cleaning cloth.
4.3 Conditions of warranty (EC only)
If despite expectations a defect occurs that cannot be repaired by yourself or your dealer, we
undertake the repair of your unit free of charge for up to three years from date of purchase.
The warranty covers the costs of material and working time, transport costs are to be borne
by the owner.
21
Advertisement
Table of Contents
