Table of Contents
Advertisement
4 Appendix
4.1 Cleaning
Use a soft cloth and normal glass cleansing fluid. CAUTION: Make sure that no fluid comes
into the unit. Do not use scouring cleaners. They may damage the surface.
4.2 Troubleshooting
Some putative defects are often caused by mistakes in operation. Sometimes other units
connected to the amplifier can cause problems. We therefore kindly ask you to read the
following tips before consulting your dealer or us.
1. No playback
a) Mute function is active, press button MUTE on your remote control or increase the
volume using the rotary encoder (11).
b) Inadvertent switching to stand by. Press power button (1). If the LED indicator and display
do not light up a fuse can be blown due to overvoltage (e.g. in case of a thunderstorm
etc.). Please contact your dealer.
2. Unit switches off during normal operation
This can happen if the temperature inside the unit becomes too high. In this case, the CD
player switches off and the display shows 'overheat'. Switch the unit off and let it cool down
for five minutes.
3. Remote control doesn't work
a) Change the battery of your remote control (see 0).
b) Point with the remote control transmitter directly to the unit.
5. The display shows „no disc", although a CD is inserted
a) Please make sure the CD is not a data disc, has not been damaged and is inserted with
the correct side facing up
b) Please clean your CD with a soft cleaning cloth.
17
Advertisement
Table of Contents
