Tuner; Tuning; Station Memory - AVM inspiration C6m Operating Instructions Manual

3.5 Tuner (if built in)
The basic functions of the tuner can be accessed by the buttons right under the display (4 – 8). For more
sophisticated functions see chapter 4.

3.5.1 Tuning

FM: Depending on the selected mode (manual / auto) the most right buttons (7, 8) under the display (3) are
named AUT or
next upper or lower station. In MAN mode the frequency changes in 50 kHz-steps as long as the button is
pressed.
DAB: The DAB radio stations are organized in "Ensembles". Therfore manual tuning is not possible. The
buttons AUT can be used to access the next or previous available DAB radio station.

3.5.2 Station memory

If You want to store a certain station in the memory, press the button MENU (6) under the display (3) for
more than 2 seconds. The display shows now on the left side the number of the actual memory position. It
can be changed by pressing the buttons below (4, 5). On the right side You can see the frequency of the
station which is actually stored in this memory position (if none: "unused") and below the frequency of the
new station to be stored.
Press SAVE to store the actual station, EXIT to cancel the procedure or DELETE if You want to delete the
stored station.
NOTE: The station memory allows You to store up to 50 stations. It stores not only their frequency, but also
the individual setting of mode (mono/stereo). You can store FM and DAB stations in mixed sequence.
PGM (4, 5) selects the stations stored in the memory. A short tip switches to the next / previous station.
Holding the button down scans automatically up / down. The number of the actual station is shown in the
display.
MAN . In AUT-mode a tip on one of the buttons lets the tuner automatically seek the
10