Dear Music lover thank you for making AVM your choice. You now own a versatile and excellent sounding hifi component. Before enjoying music, please read thru this manual carefully. After that you will know how to use your new AVM component in the optimal way.
Table of contents Vorwort Inhaltsverzeichnis Getting started Hotkeys What's in the box? System Settings Control and operating elements 4.4.1 Device Selection Installation and cooling 4.4.2 Change zone Connection to mains 4.4.3 System Information 4.4.4 User Settings Connection to a preamplifier or integrated amplifier 4.4.5 Pairing...
Getting started 1.1 What's in the box? EVOLUTION MP 3.2 / MP 5.2 Media Player • WLAN antenna • Power cable • Optionally available RC 9 remote control with docking station, power supply unit, USB • charging cable CAUTION: After unpacking, please check the scope of delivery to ensure that all the parts have been supplied and are undamaged.
25 Connector for external IR receiver 16 Analogue output right (balanced, XLR) 26 Digital input AES/EBU 17 Analogue outputs (RCA) 27 Trigger outputs 18 Analogue output left (balanced, XLR) 28 Network connection (LAN) 19 Digital output optical 29 USB digital input for storage media 20 Digital output coaxial 30 WLAN antenna connection 21 USB B digital input...
The RC S App is available free of charge and can be downloaded from the Apple App Store and the Google Play Store. For detailed instructions on how to set-up your AVM device with the RC S App, please refer to section 5.
2 Basic operation 2.1 First operation / self test In case your Media Player was not connected to mains a self test will be performed when it is switched on by the mains switch (34) for the first time. The unit will check its configuration and that all the installed components work properly.
2.5 Playable disc formats Your Media Player can play back all compact discs which are recorded according to the red book standard (means the standards for audio CDs established by Philips and Sony). Furthermore all CDRs and CDR/Ws with good reflection recorded according to this standard are playable. Most copy protected discs are also playable.
The display shows on the left side the actual title ("TRCK"), below the playing time of this title ("TIME"). Pressing the buttons < or > (2, 3) selects a title. Pressing PLAY (12) adds the selected title to the playlist. The display shows on the right side the number of programmed titles ("PGM-QTY"), below the playing time of the programmed list ("P-TIME").
HI RES bietet Ihnen die Wiedergabe von Sampleraten von bis zu 192kHz. Mac OSX benötigt hierzu ebenfalls keine zusätzlichen Treiber. PC-Systeme mit Windows hingeben benötigen einen zusätzlichen Treiber, der Ihnen auf der entsprechenden Produktseite unter www.avm-audio.com zum Download zur Verfügung steht.
3 Advanced settings 3.1 Personal setup menu The personal setup offers you a range of settings to individualize the device according to your personal needs. To enter the personal setup menu, please switch off your device on the rear of the unit at the mains switch (34).
4 RC 9 remote control 4.1 Overview Power button (Standby mode)* 15 Favorites list Light sensor 16 Volume Colour display 17 Increase/Decrease Hotkeys 1-4 18 Mute Option keys (red, green, yellow, blue) 19 Play Home menu 20 Skip (backward) Zone menu 21 Skip (forward) Info menu 22 Record...
4.2 Colour display The colour display divided into three sections in any operating mode: Header section: In the header section the current control area is shown (e.g. source, system, internet radio etc.). On the right-hand side is the charging status of the integrated lithium-ion battery (for an explanation of the charging status symbols please refer to section 1.8.1) Content section: The content section is the central user interface of your RC 9 remote control where both menu points of the currently accessed control area and graphical user elements...
4.4.4 User Settings The menu item "Settings" offers a series of useful functions which can be accessed by pressing the Navigation keys (11), the Enter key (10) or the alphanumeric input keys (25). NOTE: The left Navigation key (11) is used to delete entered characters and numbers. The blue Option key (5) is used to toggle between upper and lower case characters.
This process is also referred to as "Pairing". in order to start the pairing process, please switch off your AVm device by using the mains switch (34) on the rear side of the unit. Now please navigate to the "Systems Settings" menu on your RC 9 remote control by pressing the Settings key (9) and navigate to the menu item "Start Pairing"...
The menu item „Clock“ gives you access to the clock settings. In case of an existing internet connection both the AVM device and the RC 9 remote control receive their time from a NTP server (Network Time Protocol for clock synchonization).
Page 17
Enter key (10). At the bottom of the following list you will find a string of letters and numbers which is marked with "#ID". To enter the ID of your Media Player please visit the website of the AVM portal by vTuner: http://avmaudio.vtuner.com Please adjust the language settings of the website at the upper left side of the screen to your personal needs.
Make sure you have downloaded and installed the RC S App from the Apple App Store or Google Play Store. 2. Switch on your AVM device by turning on the mains switch on the rear-side of the unit. Wait until the starting procedure is completed and your AVM device has gone to stand-by mode. Now, switch on your AVM device by pressing the power-button on the front panel of the unit.
Page 19
Make sure you have downloaded and installed the RC S App from the Apple App Store or Google Play Store. 2. Switch on your AVM device by turning on the mains switch on the rear-side of the unit. Wait until the starting procedure is completed and your AVM device has gone to stand-by mode. Now, switch on your AVM device by pressing the power-button on the front panel of the unit.
Page 20
6. Under “SSID” select the name of the desired WiFi network you wish to connect to and choose the respective encryption and cipher modes via the “Security” and “Cipher” tabs according to the settings of your WiFi network. For details, which encryption and cipher mode you need to select, please refer to the settings menu of your WiFi router or consult your network administrator.
9. Select “Restart” in the upper-right corner of the RC S App to restart the internal streaming module of your AVM device. Then, click on “Back” in the upper-left corner of the RC S App and wait for the pop- up message “Please wait.
b) Point with the remote control transmitter directly to the unit. c) Reconnect the RC 9 remote control with your unit. This process is also referred to as ’Pairing’. In order to start the pairing process, please follow the instructions as described in section 4.4.5. 5.
9.6 Miscellaneous MP 3.2 Supply voltage 100 V - 240 V, 50 - 60Hz Power consumption during operation typ. 15W Stand-By power consumption (quickstart disabled) < 1 W Power consumption in sleep mode (quickstart enabled) < 4 W Dimensions (B x H x T) 430 x 100 x 325 mm Weight 7,9 kg...