Remote Control - AVM inspiration C6m Operating Instructions Manual

5. Remote control

The main functions of the C6m can be controlled by the RC3: ON/OFF, Volume control, source select,
Station select, PLAY/PAUSE, STOP, SKIP (see also manual of RC3)
You can also use the AVM RC1 to control the C6m. The following scetch shows the functions of which are
partly different to the printing on the surface of the remote control transmitter:
Amplifier
ON: Button on
OFF: Button off
Volume up: Button volume >
Volume down: Button < volume
Mute on / off Button vol/pol >
Internal CD: Button disc 1
Internal tuner: Button tuner
Input 1: Button aux 1
Input 2: Button aux 2
Input 3: Button aux 3
Input 4: Button aux 4
Dig in coax Button d 1
Dig in opt Button d 2
Tape: Button tape 1
Monitor on/off: Button tape 2
Tuner
Station up Button station >
Station down Button < station
Tuning up Button tuning >
Tuning down Button < tuning
mono/stereo Button mode
CD-player
Play Button play
Pause Button pause
Stop Button stop
Open / Close Button stop
Repeat 1/all Button repeat
Skip up Button skip >
Skip down Button < skip
Fast forward Button search >
Rewind Button < search
Direct access station / title
Press and hold button tuner
select or cd select and the
desired number key.
Example: CD-player title #15:
Hold cd select, press button 1,
then 5.
Tuner station # 48:
Hold tuner select, press button 4,
then 8.
14
disc1 disc2 tuner off on
aux1 aux2 aux3 < volume
aux4 tape1 tape2
d1 d2 d3 < vol/pol
d4 d5 d6 analog digital
m ode < tuning > < station
program < search > < skip
repeat tim e pause stop play
tuner select 1 2 3
cd select 5 6 7
9 0/10 >10
>
>
>
>
4
8