Detaching And Refitting The Laser Scanner Unit - Kyocera FS-6970DN Service Manual

(3) Detaching and refitting the laser scanner unit

Procedure
1. Remove the top cover (See page P.1-5-3).
2. Remove the right cover (See page P.1-5-4).
3. Remove two connectors from the main
PWB.
4. Remove four screws and then remove the
laser scanner unit.
5. Check or replace the laser scanner unit and
refit all the removed parts.
Main PWB
Figure 1-5-49
Screw
Laser scanner unit
Screw
Figure 1-5-50
Main PWB
YC7
YC14
YC12
Connectors
Screw
Screw
1-5-35
2J5