Yealink W52P User Manual page 66

User Guide W52P IP DECT Phone
You can use anonymous call rejection feature to reject incoming calls from anonymous
callers. Anonymous call rejection automatically rejects incoming calls from callers who
deliberately block their identities and numbers from showing up. You can configure the
anonymous call rejection feature on a per-line basis.
To enable the anonymous call rejection feature for a specific line:
1. Press to enter the main menu.
2. Select ->Anon.Call Rejection.
The LCD screen displays the incoming lines currently assigned to the handset.
3. Press or
4. Press or
5. Press the OK soft key to accept the change.
You can leave voice mails to someone else. You can also receive and listen to the voice
mails. The voice mail feature ensures that you will never miss any important messages.
When receiving a new voice mail, the
number of unread voice mails and the message key LED flashes red.
Note
The voice mail feature is not available on all servers. Contact your system administrator
for more information.
To leave a voice mail:
You can leave a voice mail to someone else when he or she is busy or inconvenient to
answer the call. Follow the voice prompts from the system server to leave a voice mail,
and then hang up after completing.
To configure the voice mail access code:
1. Press to enter the main menu.
2. Select ->Set Voice Mail.
The LCD screen displays the lines assigned to the handset as incoming lines and
outgoing lines simultaneously, and the number of voice mails of each line.
3. Press or
4. Press or
5. Enter the voice mail access code in the Number field.
6. Press the OK soft key to accept the change or the Back soft key to cancel.
54
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
to highlight the desired line, and press the OK soft key.
to select Enabled from the Status field.
icon appears on the LCD screen with the
to highlight the desired line, and press the Select soft key.
to select Enabled from the Status field.