Yealink W52P Quick Start Manual
  1. Manuals
  2. Brands
  3. Yealink Manuals
  4. IP Phone
  5. Telkom W52P
  6. Quick start manual

Yealink W52P Quick Start Manual

How to set up your voip
Hide thumbs Also See for W52P:
1
2
3

Advertisement

Table of Contents

Quick Start Guide
HOW TO SET UP YOUR VOIP
Setting up VoIP on your Yealink Hardphone
You will need the following details:
Account type - it can be SIP or IAX
1
Hostname, eg: talk.webafrica.co.za
2
The Default SIP port is 5060.
3
Username – this is the username for your account.
4
(the VoIP number)
Password – this is the password for your account.
5
You will find all of the above details in your customer zone.
Go to : My Services >> Voice >> Account Details >> My Voice Phone >> Account Settings.
On your PC, open your browser and type in the devices IP address.
.
To find your device's IP use a handset that is already associated with the
connected base station.
.
Press "OK > Status" and the relevant IP details will be displayed on the handset's
screen. In other words, on the phone, press "OK" twice.
.
Enter the IP address in your browser and log in
.
The default login details are:
Username: admin
Password: admin.

MANUALLY CONFIGURE THE SIP ACCOUNT

Click the "Account" Tab.
Set "Line Active" to "Enabled".
Now fill in all the fields using the information in your "Account Settings" page in
your customer zone.
Hit "Confirm".

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W52P and is the answer not in the manual?

Questions and answers

Related Manuals for Yealink W52P

Summary of Contents for Yealink W52P

  • Page 1 Quick Start Guide HOW TO SET UP YOUR VOIP Setting up VoIP on your Yealink Hardphone You will need the following details: Account type - it can be SIP or IAX MANUALLY CONFIGURE THE SIP ACCOUNT Hostname, eg: talk.webafrica.co.za The Default SIP port is 5060.
  • Page 2 You will see the page refresh and change from a “Registering” state to a ADDING ADDITIONAL HANDSET TO EXISTING LINE “Registered” state. If you have two handsets and only one VoIP account, you will need to allocate both handsets to use the same line. Select “Number Assignment”...
  • Page 3 FACTORY RESET Select “Reset to Factory Setting”. If you ever need to reset the base station to clear all configurations, log into the device following the same steps outlined above.. Select the “Settings” tab: Click “OK” to approve. Select the “Upgrade” option. The device will take a few minutes to reset.

Table of Contents