Yealink W52P User Manual page 30

User Guide W52P IP DECT Phone
You can lock the handset keypad to prevent keys from being accidentally pressed.
To lock the keypad:
1. Long press
message "Keypad Locked, Press and hold „#‟ to unlock!".
The keypad is locked and the
You can still answer or reject incoming calls as usual. You can also end the
answered call by pressing
To unlock the keypad:
1. Long press
Unlocked".
The keypad is unlocked and the
Note
If the keypad is locked, only the emergency numbers can be dialed out. You must enter
the digits of the emergency number continuously. To make emergency calls, you should
configure the emergency numbers in advance. For more information, refer to
Numbers on page 38.
You can locate a misplaced handset using the base station to which this handset is
registered.
To locate a handset:
1. Press on the base station.
All handsets registered to this base station will ring simultaneously (Paging) and
display the IP address of the base station on the LCD screen.
This helps you locate your handset easily.
You can press any key on the handset or press
end paging.
If the silent mode is switched on, the handset will not ring when receiving an incoming
call, but you can still see the incoming call information on the LCD screen. You can switch
the silent mode on if you do not want to be disturbed.
18
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
when the handset is idle until the LCD screen prompts the
icon appears on the idle screen.
.
again until the LCD screen prompts the message "Keypad
icon disappears from the idle screen.
Emergency
again on the base station to