Yealink W52P User Manual page 61

To un-mute a call:
1. Press again.
The icon disappears from the LCD screen.
You can place an active call on hold. At any time, at most one active call can be in
progress on your handset. Another call can be answered and made while placing the
original call on hold.
To place a call on hold:
1. Press the Options soft key during a call, and select Hold.
The call is placed on hold and the
To resume a hold call:
Do one of the following:
- Press the Resume soft key.
- Press .
- Press .
Two Calls on Hold:
If two calls are placed on hold on the handset, press the Resume soft key to resume the
current call. Press
Note
When the call on the handset is on hold, placing the handset in the charger cradle will
not end the call.
You can enable or disable the call waiting feature on the handset. If the call waiting
feature is enabled, the handset will notify you of a new incoming call during a call, and
present the incoming call information visually on the LCD screen. You can also enable
the handset to play a warning tone when receiving a new incoming call during a call. If
the call waiting feature is disabled, the new incoming call will be automatically rejected
by the handset.
To configure the call waiting feature:
1. Press to enter the main menu.
2. Select ->Call Waiting.
3. Press or
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
icon displays on the LCD screen.
, or the Swap soft key to swap between the two calls.
to select the desired value from the Status field.
Call Features
49