Yealink W52P User Manual page 27

4. Press the Done soft key.
5. Press or
6. Enter the valid values in the IP Address, Subnet Mask, Default Gateway, Primary
DNS and Secondary DNS fields.
7. Press the Save soft key to accept the change.
If you are using an xDSL modem, you can connect your base station to the Internet via
PPPoE mode. The PPPoE port will perform a PPP negotiation to obtain the IP address.
Contact your system administrator for the PPPoE username and password.
To configure PPPoE:
1. Press to enter the main menu.
2. Select ->System Settings->Network.
3. Enter the system PIN (default: 0000).
4. Press the Done soft key.
5. Press or
6. Enter the valid values in the PPPoE User and PPPoE Password fields.
7. Press the Save soft key to accept the change.
Note
Using the wrong network parameters may result in inaccessibility of your phone and may
also have an impact on your network performance. For more information about these
parameters, contact your system administrator.
You can view the system status on your handset. Available information of the system
status includes:
General information—including the IP address, MAC address, firmware version and

RFPI code of the base station.
Network status—including the IP type, subnet mask, gateway, primary DNS and

secondary DNS.
Handset status—including the device model, hardware version, firmware version,

product ID, IPUI code and area of the handset.
To check the general information:
1. Press to enter the main menu.
2. Select ->System Status.
The LCD screen displays the general information and the More... option.
3. Press or
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
to select Static from the IP Address Type field.
to select PPPoE from the IP Address Type field.
to scroll through the list and view the specific information.
Basic Operations
15