Yealink W52P User Manual page 59

To place a new call during an active call:
You can have at most two calls on your handset.
1. Press the Ext.Call soft key.
The active call is placed on hold.
2. Enter the desired number in the Call To field using the keypad.
3. Press or
Note You can also make an IP call by directly dialing the IP address of any IP phone. For
example, IP: 192.168.1.15.
You can answer a call in three ways:
Using the earpiece

Using the speakerphone

Using the headset

Note
You can ignore an incoming call by pressing the Silence soft key or reject an incoming
call by pressing the on-hook key.
You can also activate Do Not Disturb mode on a per-line basis to reject all incoming calls
of the specified line.
Answering When Not in Another Call
In all cases, the active call will appear on the LCD screen showing call duration and
destination.
To answer a call using the earpiece:
1. Press or the Accept soft key.
To answer a call using the speakerphone mode:
1. Press .
To answer a call using the headset:
1. With a headset connected, press the Accept soft key.
Answering When in Another Call
If you are during an active call, an incoming call arrives on the handset, do the
following:
1. Press ,
The incoming call is answered and the original call is placed on hold.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
to dial out.
or the Accept soft key.
Call Features
47