Copying Groups; Moving Groups - Philips Strand Lighting Operation Manual

Operation Guide
Assigning Name using Edit Group Window
You may also assign a Name to the group and its contained fixtures using the Edit Group Window. Please see
Group Window" on page 80

Copying Groups

Copy Groups using Group Pool Window
Press and hold the [COPY] key while holding down the [GROUP] key. The Group Pool window will be shown. Now
select the Group you would like to copy, followed by the destination Pool Item.
Copying Groups using Command Line Interface
You may copy groups using the Command line approach by pressing the [COPY]. Then hit the [GROUP] key,
followed by the source Group ID, in this case [1]. Now enter the destination Group ID, ie [5]. Hit [ENTER] to
complete the command.

Moving Groups

Move Groups using Group Pool Window
Press and hold the [MOVE] key while holding down the [GROUP] key. The Group Pool window will be shown. Now
select the Group you would like to move, followed by the destination Pool Item.
Moving Groups using Command Line Interface
You may move groups using the Command line approach by pressing the [MOVE] key. Then hit the [GROUP] key,
followed by the source Group ID, in this case [1]. Now enter the destination Group ID, ie [5]. Hit [ENTER] to
complete the command..
7 8
Programming
Figure 137: Enter Group Name using On-Screen Keyboard
for details.
Figure 138: Command Line Interface - Copying Groups
Figure 139: Command Line Interface - Moving Groups
500ML Lighting Control Console
"Edit