Replacing A Group - Philips Strand Lighting Operation Manual

500ML Lighting Control Console
Operation Guide
Removing Fixture(s) from a Group using Group Pool Window
Press and hold the [REC] key and then press the [GROUP] button. As shown in Figure 124 on page 73, the Group
Pool window will appear. You may now select the Remove Option in the Record Toolbar (Figure 129). Select the
Group you would like to remove the selected Fixtures from.
Figure 129: Record Toolbar - Remove Option
If you did not select an option from the Record Toolbar, a dialog window asking you what to do will open up (Figure
130). Click on Remove from Group.
Figure 130: Merge or Replace Group? Window
Note: You may also hit the [REC] key only, and select the target Group Item in the External Monitors Group Pool
Window.
Removing Fixture(s) from Group using Command Line Interface
Press the [REC] key, followed by the [GROUP] key. You may now select the Remove Option in the Record Toolbar
(Figure 129). Enter the number of the group you would like to remove the fixtures from, ie. [1], followed by
[ENTER].
Figure 131: Command Line Interface

Replacing a Group

Before you may replace (overwrite) an entire group, you first need to select the fixtures you would like to store in the
new group.
75
Working with Groups