Table of Contents
Advertisement
500ML Lighting Control Console
Operation Guide
Please note that the system library is read-only. If you would like to edit a fixture that is contained in the system
library, you first need to transfer it to the user library. See
"Transfer Fixtures Between Libraries" on page 158
for
more details.
Figure 276: Select Library Screen
A menu that allows you to pick a fixture type will appear. You may search for fixtures using the filter field shown in
the top part of the screen. Alternatively, you may select the fixture by selecting the Manufacturer, Type and Mode.
Click on Edit when done.
Figure 277: Select Fixture Type Dialog
The Library Editor will be shown
(Figure 278 on page
153) allowing you to make changes to the fixture type. Click
on Save and Close when done.
Note: If you edit a Fixture in the User Library and are using the same fixture type in your show, changes made in the
User Library are not automatically carried over to the fixture type within the Show Library. In order to carry over the
changes, replace the fixture type in the Show Library by the appropriate Fixture Type from the User Library.
1 5 2
Programming
Advertisement
Table of Contents
