Philips Strand Lighting Operation Manual page 146

Operation Guide
Single On Triggers
Single On Triggers are emitted by either Note On or Note Off only sources, or by Program Changes. Since the
console is only getting one single command as opposed to an On / Off command, some of the actions mentioned
previously are not available.
On events.
Item
Cuelist
Grandmaster
Master Speed
Master Fade
MIDI Out
Timecode
1 4 4
Programming
Table 6, "Single On Triggers by Item Type"
Table 6: Single On Triggers by Item Type
Action
Toggle
Go
Goto
Pause / Back
Skip +
Skip -
Off
Instant Off
Assert
Toggle Blackout
TapSync
Increase Time
Decrease Time
Multiply Time
Divide Time
Manual Go
Toggle Enabled
Enable
Disable
TapSync
Increase Time
Decrease Time
Multiply Time
Divide Time
Note On
Note Off
Program Change
Toggle Enabled
Enable
Disable
Reset Generator
shows the triggers are available for Single
Description
The cuelist will be started when the trigger is received. If it is already
running, it will be stopped.
A Go command is issued on this cuelist.
A Goto command is issued on this cuelist. The destination cue needs to be
defined in the Option Group box.
The issue of the command will pause the cuelist including all ongoing fades.
The second will advance through the cuelist in reversed order
Skips to the next cue in the cuelist without switching it on. If the cuelist is
running it will skip to the next cue, ignoring all fade times.
Skips to the previous cue in the cuelist without switching it on. If the cuelist
is running it will skip to the previous cue, ignoring all fade times.
Switches off the cuelist using the off time to fade out given in the cuelist
options.
Switches off the cuelist ignoring the off time set in the cuelist options.
Will bring the cuelist "Up Front" in the priority stack but does not advance
through the cuelist.
Blackout Mode will toggle.
Measures the time between Note On commands and sets the Speed Master
to that amount.
Time of the Speed Master will be increased by given amount.
Time of the Speed Master will be decreased by given amount.
Time of the Speed Master will be multiplied by given amount.
Time of the Speed Master will be divided by given amount.
Will issue a "Go" Command to all cuelists listening to this Speedmaster. It
only applies to cuelists that are already running.
Will pause / unpause the Speed Master
Will unpause the Speed Master.
Pauses the Speed Master.
Measures the time between received Note On commands and sets the
Fademaster to that amount.
Time of the Fademaster will be increased by given amount.
Time of the Fademaster will be decreased by given amount.
Time of the Fademaster will be multiplied by given amount.
Time of the Fademaster will be divided by given amount.
Defined Note On command will be output from the console's MIDI Out.
Defined Note Off command will be output from the console's MIDI Out.
Defined Program Change command will be output from the console's MIDI
Out.
The Timecode Enable / Disable setting will be toggled.
The Timecode will be enabled.
The Timecode will be disabled.
The internal Timecode Generator will be reset to the Start Value.
500ML Lighting Control Console