Table of Contents
Advertisement
500ML Lighting Control Console
OPERATION
1. To Begin Using the Console
Unpack Console and Accessories
Before you can use the console, unpack it and its accessories from the shipping carton. For a complete list of included
items, refer to
Connect Console to Any Accessories and Power
Note: Before connecting any accessories to the 500ML Lighting Control Console, the console must be located on a
sturdy and flat surface in a dry, dust free environment.
Connect all optional accessories such as USB keyboard, mouse, touchscreen, etc. to the console.
Connect DMX cables to the console's DMX output ports.
If you are using ArtNet / ShowNet for data output, also connect the network cable to the consoles network port.
Use the supplied AC power cable to connect the console to a grounded, AC power source. The console operates on an
AC voltage of 100 to 240VAC.
Refer to
Figure 2 on page 10
Boot the Console
After making all the necessary connections to the DMX control and/or ArtNET / ShowNet networks, external
peripherals, etc. the console is ready for use.
• To begin using the console, press the power button on the right hand side next to the touchscreen (refer to
on page
8).
• The console will now start to boot. Additionally, the boot menu offers some test and maintenance utilities. The
500ML Lighting Control Console will perform a system check during boot up. Once the system is ready to use, the
Welcome screen will appear
Once the Welcome Screen appears, you may either start creating a new show file or load an existing one. See
"Working with Shows" on page
"Included Items" on page
7.
for console connections.
(Figure
41).
37.
Figure 41: Welcome Screen
Operation Guide
Figure 1
To Begin Using the Console
31
Advertisement
Table of Contents
