Table of Contents
Advertisement
500ML Lighting Control Console
• Default Fixture Settings - You can select Invert Pan, Invert Tilt or React to Master (react to Grandmaster).
In this example 12 fixtures will be added, with User Number starting at 501. After setting these parameters, click
Next.
Note: User Numbers are used to select the fixtures using the Keypad. For more info on User Numbers, please see
"Change User Number" on page
Fixture Selected
Fixture Starting
Address
Fixture Settings
Selection
Patching Fixtures
As shown in
Figure 79 on page
different options available to choose from:
• No Patch - The fixtures will be added but not patched.
• Manual Patch - The fixtures will be added and patched to the address and universe user specified.
Patch" on page
• Auto Patch - The fixtures will be patched at the next free address of the selected universe automatically.
Patch" on page
52.
Figure 78: Enter Fixture Count Screen
50, this window is used to patch our fixtures to the DMX universes. There are three
56.
57.
See "Unpatch" on page
56.
Operation Guide
Number of Fixtures Being Added
See "Manual
See "Auto
Fixture Setup
49
Advertisement
Table of Contents
