Philips Strand Lighting Operation Manual page 38

Lighting control console
Hide thumbs Also See for Strand Lighting:
Table of Contents

Advertisement

500ML Lighting Control Console
Operation Guide
Note: If you assign IP Addresses manually, you must set both the IP Address and Subnet Mask. Consult your
network administrator for assistance.
IP Address
This field will display the IP Address of the console if manual configuration has been selected. Use the Edit button on
the right of the text field to set the IP Address.
Subnet Mask
This field will display the Subnet Mask of the console's Ethernet port if manual configuration has been selected. Use
the Edit button on the right of the text field to set the Subnet Mask.
Gateway
This field will display the Gateway Address of the Ethernet port if manual configuration has been selected. Use the
Edit button on the right of the text field to set. The Gateway is only needed should you wish to connect your console
to the Internet.
DNS Server
This field will display the DNS Server of the console's Ethernet port if manual configuration has been selected. Use
the Edit button on the right of the text field to set. The DNS Server is only needed should you wish to connect your
console to the Internet.
To Save Changes
Click on Apply Changes to apply the changes and store the settings permanently.
To Cancel Changes
Click on Cancel to revert to your previous configuration.
Current Ethernet Status
The Current Ethernet Status box shows basic information about the current status of the Ethernet port, IP Address,
Link Speed and more.
Figure 50: Current Ethernet Status
• Link Status indicates if the IP Address has been set manually, or if it has been obtained from a remote DHCP
Server.
• Link Speed show the current network connection speed.
• IP Address shows the console's current IP Address setting.
• Subnet Mask shows the current Subnet Mask setting.
• Gateway shows the Gateway's IP Address.
• DNS Server shows the DNS Server's IP Address.
Note: The Test Internet Connection button is useful to test if the console has access to the Internet, which may be
used to update the consoles software version.
3 6
OPERATION

Advertisement

Table of Contents
loading

Table of Contents