Turning On; Icons; Step 4 - Turning On Your Monitor - Angelcare AC701 Owner's Manual

STEP 4 - TURNING ON YOUR MONITOR

1
When the Parent Unit is turned
ON and the Nursery Unit is OFF,
the Parent Unit will be searching
for connection with the Nursery
Unit. The Connection icon will scan
as the following cycle.
IMPORTANT ICONS
Temperature icon:
Indicates room temperature
Battery Level icon:
Indicates battery level
Empty
1/3 Full
2/3 Full
Full
Settings Icons: Access to settings
VOX icon: Indicates Vox function
is active (Voice activation)
ECO icon: Indicates ECO function
is active
Temperature Alarm icon: Indicates
Temperature Alarm is active
2
1) Press the Parent Unit ON/OFF button
to open and display normal mode.
2) Push and hold the Nursery Unit
left 'wing' button for 2 seconds.
The LCD monitor has 30 seconds
timeout to go to power saving
mode (dimmer illumination).
Press any keys to wake up.
If there is a lost connection
between the 2 units
(refer to troubleshooting):
• The Out-of-Range icon
will appear on the screen and
the Parent Unit will beep.
Sound icon: Indicates sound
is active
Sensor Pad icon: Indicates
the Movement Sensor is active
Pendulum icon: Indicates
the 'TIC' function is active
Level Bar: Indicates sound level
from Nursery Unit.
Connection icon: Indicates
the connection quality between
the Parent Unit and Nursery Unit.
Good connection
Fair connection
Poor connection
Out-of-Range
E
N
13