ingenuity intrust 35 Instruction Manual page 40

2. Release the vehicle belt.
3. Pull the vehicle belt back through the belt path on the
base.
4. Close the vehicle belt positioner.
5. Remove the base from the vehicle
seat or airplane seat.
REMOVING LATCH INSTALLATION
1. Push and hold the LATCH
connector button.
2. Pull the LATCH connector while
holding the button to release the connector from the
vehicle anchor.
3. Repeat these steps with the other LATCH connector.
4. Store the LATCH connectors in the base.
Loose LATCH connectors can strangle your child.
STORING LATCH CONNECTORS
Store LATCH connectors properly when they are not securing
the base.
1. Place each LATCH connector in its storage compartment in
WARNING
39
1