Installing/Removing The Base; Warnings - ingenuity intrust 35 Instruction Manual

5.0 – INSTALLING/REMOVING THE BASE
To reduce risk of injury or death, use the following steps to
install the infant car seat base in your vehicle.

5.1 Warnings

• Observe and follow the instructions provided by your
vehicle manufacturer and in this manual. Before beginning,
ensure that you have read and understood Section 4 –
Choosing an Appropriate Vehicle Seat Location.
• You MUST correctly tighten the vehicle belt to securely
install the infant car seat. Refer to your vehicle owner's
manual and the following warnings and instructions while
installing the base.
• Ensure that the seat belt buckle tongue goes into the
correct buckle. The seat belt should not be twisted or
turned.
• Ensure that the seat location provides enough room for the
infant car seat:
• If vehicle manual allows installation in a front passenger
seat (see air bag warning, Section 2.5), slide the
vehicle seat as far back from the dashboard as possible
and follow the vehicle manufacturer's procedure for
deactivating air bag.
WARNING
30