Safe Vehicle Belt Systems - ingenuity intrust 35 Instruction Manual

DO NOT use any seating position that contains an inflatable
seat belt.

4.3 SAFE Vehicle Belt Systems

THE FOLLOWING BELT SYSTEMS CAN BE USED WITH YOUR
INFANT CAR SEAT. These systems allow secure installation if the
seat location meets all other requirements. Ensure that the seat
location meets requirements in your vehicle owner's manual
and in these instructions.
See Sections 5, 6, and 7 for detailed instructions for installing
the infant car seat.
• Seat Belts with Switchable
Retractor—A switchable retractor
is the most common type of seat belt retractor and must
be switched to locked mode before using with your infant
car seat. Lock the seat belt by pulling the shoulder belt out
all the way slowly. The seat belt is locked when you hear
an audible click when feeding the seat belt back in to the
retractors and you are unable to pull the belt out further.
• Seat Belts with Locking Latch Plate—
There are two types of locking latch
plates. One type is found on lap only
belts; the other type is found on lap/
shoulder belts. For lap belts only, pull
the free end of the belt to tighten and
lock. For lap/shoulder belts, pull the
shoulder belt and the lap portion of
the belt will tighten and lock.
24