Section 6: Thermostat Information - Pentair Nuheat Signature Operating Instructions Manual

SECTION 6: THERMOSTAT INFORMATION

Section 6.1 Thermostat Information
From the home screen, access the
Thermostat Info items by pressing
Settings>Thermostat Info.
Press the or
both pages of thermostat information:
• Thermostat name - Name that was entered during the WiFi Settings setup.
Refer to section 4 on page 15.
• Thermostat ID - Unique serial number assigned to the thermostat
during manufacturing.
• WiFi network - Name of the WiFi network to which the thermostat is connected.
• Account - Email address that was entered during the WiFi Settings setup.
Refer to section 4 on page 15. This is the email where the activation/verification
email was sent.
• Account status - Reports whether thermostat has been confirmed or not.
Your MyNuheat.com
confirmed to your account.
• Server status - Status of the MyNuheat server.
• Floor sensor - Status of the floor sensor.
• Air/Room sensor - Status of the built-in air/room temperature sensor.
• GFCI - Status of the GFCI. If ? appears, it means the GFCI has not been tested.
Refer to GFCI Section on page 5.
• GFCI tested - Date that the GFCI was last tested.
• Appl. version - Firmware version number (for internal use during manufacturing).
• WiFi version - WiFi version number (for internal use during manufacturing).
Preview View
arrows at the top to view
account must be setup in order for the thermostat to be
SIGNATURE OPERATING MANUAL
17