Section 3: Program/Schedule - Pentair Nuheat Signature Operating Instructions Manual

SECTION 3: PROGRAM/SCHEDULE

Section 3.1 Program/Schedule
From the home screen, access the Program/Schedule menu by pressing
Settings>Program/Schedule.
Below is the default schedule of the Nuheat SIGNATURE thermostat:
Weekday
Period
Wake
Leave
Return
Sleep
Weekend
Period
Wake
Sleep
To adjust the setpoint(s):
1. Use the
2. Select the period that you want to adjust.
3. Using the
4. Press Cancel to ignore the change or press Save to confirm.
To set a new program/schedule, Press New Program at the bottom of the screen:
1. Select the days that share the same schedule.
2. Press Next.
3. Select the period that you want to adjust.
4. Using the
5. Press Cancel to ignore the change or press Save to confirm.
6. Press Next.
7. Repeat steps 1 to 6 until all days have been programmed.
8. Press Done to save the program/schedule.
14
THERMAL BUILDING SOLUTIONS
Start Time
6:00 am
9:00 am
5:00 pm
11:00 pm
Start Time
8:00 am
11:00 pm
or arrows to toggle between weekdays and weekend days.
or arrows, adjust the time and temperature of the setpoint.
or arrows, adjust the time and temperature of the setpoint.
Floor Temperature
Tile
88°F (31°C) 82 °F (28°C)
74°F (23°C) 74 °F (23°C)
88°F (31°C) 82 °F (28°C)
74°F (23°C) 74 °F (23°C)
Floor Temperature
Tile
88 °F (31°C) 82°F (28°C)
74 °F (23°C) 74 °F (23°C)
Wood
Wood
Preview View