Temporary Bypass And Hold Options - Pentair Nuheat Signature Operating Instructions Manual

SECTION 1: HOME SCREEN
Section 1.1 Temporary Bypass
and Hold Options
If the thermostat is following the
program/schedule (in Auto mode), you
can temporarily bypass the programmed
temperature by pressing the
button until the desired Set To
temperature is displayed. The thermostat
will maintain this temperature until the
start of the next period.
Press Resume Program to cancel
the temporary bypass.
Press Hold Options to access
more options.
Hold Options
The Nuheat SIGNATURE thermostat allows you to set the duration you want to hold the
temporary bypass temperature. Change the duration of the hold time by pressing the
arrows. Alternatively, press Permanent Hold to hold the temporary bypass
or
temperature indefinitely.
Press Cancel to ignore the change or press Save to confirm.
On the home screen, press Resume Program to cancel the temporary bypass.
Preview View
or
SIGNATURE OPERATING MANUAL
7