Temperature Display; Floor Type; Early Start - Pentair Nuheat Signature Operating Instructions Manual

SECTION 2: SETUP/PREFERENCES
Section 2.7 Temperature Display
The thermostat can display either of the
following temperatures on the
home screen and screensaver:
• Floor temp. (default)
• Air/Room temp.
Press Cancel to ignore the change
or press Save to confirm.
Section 2.8 Floor Type
Set according to your flooring type.
When Engineered/Laminate is
selected, the floor temperature will be
limited to 82°F / 28°C.
NOTE: This setting is not available if
Temperature Control is set to
Air/Room temp. Refer to section 2.6
on page 11.
Press Cancel to ignore the change
or press Save to confirm.
Section 2.9 Early Start
Early Start calculates the optimal time
to start heating to ensure your floor
reaches the desired temperature at
the scheduled time in your program/
schedule. It only applies if your
thermostat is following a programmed
schedule (ie. thermostat is
in Auto mode).
Press Cancel to ignore the change
or press Save to confirm.
12
THERMAL BUILDING SOLUTIONS
Preview View