T A B L E O F C O N T E N T S INTRODUCTION ....................SYSTEM TESTS ....................SETUP WIZARD ....................GFCI ........................SECTION 1: HOME SCREEN ................. Temporary Bypass and Hold Options ..........Energy Use ................Settings ..................SECTION 2: SETUP/PREFERENCES ..............
INTRODUCTION THANK YOU FOR CHOOSING NUHEAT SIGNATURE! You have chosen the most advanced thermostat to control your Nuheat electric floor heating system. This manual will cover each of the features of the Nuheat SIGNATURE thermostat. Preview View THERMAL BUILDING SOLUTIONS...
SETUP WIZARD The Nuheat SIGNATURE thermostat features a Setup Wizard to guide you through the basic setup process. The Setup Wizard is available the first time the thermostat is connected to power or after a factory reset is initiated.
SECTION 1: HOME SCREEN Operating mode - Auto* means the thermostat is following the program/schedule. Manual means the thermostat is NOT following the program/schedule and is being controlled manually. Refer to section 2.5 on page 10. Increase the temperature Decrease the temperature Heating indicator - when visible, system is heating 10.
Hold Options The Nuheat SIGNATURE thermostat allows you to set the duration you want to hold the temporary bypass temperature. Change the duration of the hold time by pressing the arrows. Alternatively, press Permanent Hold to hold the temporary bypass temperature indefinitely.
SECTION 1: HOME SCREEN Section 1.2 Energy Use The Nuheat SIGNATURE thermostat tracks the amount of time your floor heating system has been heating. Press Day/Week/Year to view the different time ranges. Press Back to return to the home screen.
SECTION 2: SETUP/PREFERENCES From the home screen, access the Setup/Preferences menu by pressing Settings>Setup/Preferences. Press the arrows at the top to view both pages of Setup/Preferences. Section 2.1 Language Choose between English/Français/Español. Press Cancel to ignore the change or press Save to confirm. Section 2.2 Date Set the current month/date/year.
SECTION 2: SETUP/PREFERENCES Section 2.4 Unit Choose between Fahrenheit or Celsius. Press Cancel to ignore the change or press Save to confirm. Section 2.5 Operating Mode The thermostat has two operating modes: Auto - Use Auto (default) mode if you want the thermostat to follow a programmed heating schedule.
SECTION 2: SETUP/PREFERENCES Section 2.6 Temperature Control The thermostat can be configured to control the floor temperature, air/room temperature, or a combination of floor and air/room temperature. Temperature Control Setting Description The thermostat controls the Floor temp. (default) floor temperature. The thermostat controls the air/room temperature.
SECTION 2: SETUP/PREFERENCES Section 2.7 Temperature Display The thermostat can display either of the following temperatures on the home screen and screensaver: • Floor temp. (default) • Air/Room temp. Press Cancel to ignore the change or press Save to confirm. Section 2.8 Floor Type Set according to your flooring type.
SECTION 2: SETUP/PREFERENCES Section 2.10 Floor Limit Set the maximum temperature you want the floor to reach. The floor heating will not turn on if the floor temperature is above the set floor limit. If the floor limit is set too low, your floor heating system will not turn on.
SECTION 3: PROGRAM/SCHEDULE Section 3.1 Program/Schedule From the home screen, access the Program/Schedule menu by pressing Settings>Program/Schedule. Below is the default schedule of the Nuheat SIGNATURE thermostat: Weekday Floor Temperature Period Start Time Tile Wood Wake 6:00 am 88°F (31°C) 82 °F (28°C)
After 1-2 minutes, you will notice the WiFi icon turn on at the top of the home screen. This means your Nuheat SIGNATURE thermostat is now connected to your WiFi network. If you cannot connect to your WiFi network, refer to section 8 on page for WiFi troubleshooting.
SIGNATURE thermostat. Refer to section 4 on page 15. To setup weather information to be displayed on your Nuheat SIGNATURE thermostat: 1. After you have completed the WiFi setup. Refer to section 4 on page 15. Press Change on the Weather Location screen.
SECTION 6: THERMOSTAT INFORMATION Section 6.1 Thermostat Information From the home screen, access the Thermostat Info items by pressing Settings>Thermostat Info. Press the arrows at the top to view both pages of thermostat information: • Thermostat name - Name that was entered during the WiFi Settings setup. Refer to section 4 on page 15.
SECTION 7: FACTORY RESET Section 7.1 Factory Reset From the home screen, access the Factory Reset by pressing Settings>Factory Reset. Factory Reset allows you to reset the thermostat back to factory default settings. This can be used to reset the thermostat for a new owner or for troubleshooting purposes.
Try entering your password again. Be careful to enter uppercase and lowercase letters, numbers Wrong password and symbols as needed. The Nuheat SIGNATURE thermostat can switch between three different keyboards to enter these characters. If you have another device connected to your...
Page 20
2003, you should be able to change the setting from WEP to WPA (http://www.tech-faq.com/ how-to-change-wep-to-wpa.html).Without a WiFi connection, the Nuheat SIGNATURE thermostat can still control your floor heating system. Nuheat recommends the best course of action is to upgrade your security settings to properly protect your network from hackers.
Page 21
Try turning off other wireless devices (Bluetooth, WiFi, wireless phones/cameras) that may cause Presence of wireless interference interference then test the Nuheat SIGNATURE thermostat’s network connection. Restart your Nuheat SIGNATURE thermostat. To restart the Nuheat SIGNATURE thermostat, go SIGNATURE thermostat needs to Settings>Factory Reset and select Reset.