Temperature Control - Pentair Nuheat Signature Operating Instructions Manual

SECTION 2: SETUP/PREFERENCES
Section 2.6 Temperature Control
The thermostat can be configured to
control the floor temperature, air/room
temperature, or a combination of floor
and air/room temperature.
Temperature Control Setting
Floor temp. (default)
Air/Room temp.
Combined (advanced)
Press Cancel to ignore the change or press Save to confirm.
Preview View
Description
The thermostat controls the
floor temperature.
The thermostat controls the air/room
temperature. This setting disables the
floor sensor and is useful if the floor
sensor is damaged or not installed.
For advanced users only - This setting
allows control of the floor heating system
based on air/room temperature but will
not turn on the floor heating system if the
floor temperature is above the floor limit.
SIGNATURE OPERATING MANUAL
11