Wi-Fi Protected (Wps) Setup - D-Link DIR-516 User Manual

Section 2 - Setting Up With a Web Browser - Access Point Mode

Wi-Fi Protected (WPS) Setup

Wi-Fi Protected Setup (WPS) System is a simplified method for securely connecting new devices to your network. The process
as easy as pressing a button (the Push-Button Connection method) or correctly entering the 8-digit code (the PIN method).
If you wish to use the Push-Button Connection (PBC) method, simply press
the WPS button on the side of the router. The power LED will begin to flash.
Within 120 seconds, press the WPS button on the device that you wish to
connect. The power LED will turn solid green if the connection is successful.
To connect using the PIN method, click Next to begin the WPS setup process.
Enter the PIN for the wireless NIC and click Start PIN. If successful, you will
then be taken to another screen and a message will tell you to run WPS in
the client device within 2 minutes.
D-Link DIR-516 User Manual 35