Mac Filter - D-Link DSL-2750U User Manual

DSL-2750U 3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual

MAC Filter

On the Wi-Fi / MAC Filter page, you can define a set of MAC addresses of devices which will be
allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to
access the WLAN.
By default, MAC filtering is not active (the Disabled choice of the MAC filter restrict mode
radio button is selected).
To open your wireless network for the devices which MAC addresses are specified on the MAC
addresses tab and to close the wireless network for all other devices, select the Allow choice of
the MAC filter restrict mode radio button and click the Change button.
To close your wireless network for the devices which MAC addresses are specified on the MAC
addresses tab, select the Deny choice of the MAC filter restrict mode radio button and click
the Change button.
Figure 74. The MAC filter for the wireless network.
Page 84 of 138
Configuring via Web-based Interface