Epson RUNSENSE SF-810 User Manual page 4

Goal function (distance race)
Measurement function
Introduction
Allows you to set a distance as your goal and measure the distance taken until that goal is
reached.
You can exercise while checking the distance. You can also calculate the estimated total time to
complete the set distance.
See "Using the goal function" on page 40.
You can use the recall screen to check recorded measurement data.
See "Viewing past workouts" on page 49.
Allows you to track a wide variety of data during your workout. You can:
Measure your heart rate
O
See "Measuring your pulse (heart rate)" on page 29.
Automatically record a lap when a set time or distance has been reached (AT Lap function)
O
See "Recording laps automatically" on page 44.
Automatically stop measuring when you stop running, and resumes when you continue
O
running (AT Pause function)
See "Starting/stopping measurement automatically" on page 45.
Set and measure your target pace for one mile or kilometer
O
See "Setting a pace" on page 46.
Change the items and layout of the Measurement screen display (Screen settings function)
O
See "Screen settings" on page 77.
Tap to display a set function
O
See "Tap" on page 27.
3