Wearing The Product - Epson RUNSENSE SF-810 User Manual

Wearing the product

When wearing the product, make sure it does not touch your ulna bone. Wear the product closely around your
wrist. Tighten the wristband if your pulse (heart rate) is not measured correctly. However do not wear the product
too tight. If you feel any discomfort, loosen the wristband.
Note:
O After you put the product on, press the A button on the Time screen, and check that your pulse is measured. Your
pulse (heart rate) should be displayed within about 30 seconds. If it is not displayed, adjust the position of the product
on your wrist.
This product measures your pulse and displays it as the heart rate on the screen.
O The product may not be able to measure accurately if it is not in contact with your skin or if it moves around too much
while exercising.
c
Important:
The accuracy of the heart rate sensor is affected by a low body or ambient temperature. Protect the product by
wearing it under a sleeve in cold or windy conditions. A warning will appear if the temperature of the product drops
too low.
Setting up your SF-810
Sensor (reads your pulse on the back of your wrist)
13