Measuring Time, Distance, And Speed; What Is The Chronograph Function; Measuring - Epson RUNSENSE SF-810 User Manual

Measuring time, distance,
and speed
What is the chronograph
function?
The chronograph function allows you to measure split
times and lap times simultaneously. You can also
automatically measure distance, speed, and route using
the positional information and time from the GPS
signal.
Note:
Set the Activity Type before you start exercising.
See "Measurement settings" on page 71.
Split Time
Measures the elapsed time. Press C to start measuring,
and press C again to stop measuring.
Lap Time
Records the elapsed time for each lap. To record a lap,
press D while measuring.
With the AT Lap function, laps are recorded
automatically when a time or distance set in advance
has been reached.
See "Recording laps automatically" on page 44.
Measuring your workouts

Measuring

1
Press C on the Time screen to display the
Measurement screen.
GPS positioning starts, and the Measurement
screen is displayed once positioning is complete.
2
Press C to start measuring.
3
Press D while measuring to record a lap.
The Lap Hold Screen is displayed for 5 seconds,
then the Measurement screen is displayed.
31
See "GPS Positioning" on page 19.
See "Lap Hold screen" on page 33.