Setting A Pace - Epson RUNSENSE SF-810 User Manual

Setting a pace

You can use the Target Pace function to sound an
alarm if you fall behind your preset pace.
Set your target time per one mile or kilometer (your
target pace) and the range at which the alarm sounds
when you fall behind that target pace.
Note:
You can also adjust the Target Pace function from the
Run Connect PC application.
See "Setting the Target Pace Function" on page 65.
1
Press C on the Time screen to display the
Measurement screen.
GPS positioning starts, and the Measurement
screen is displayed once positioning is complete.
See "GPS Positioning" on page 19.
Measuring your workouts
2
Hold down B on the Measurement screen to
display the Measure set. menu.
3
Press C or D to highlight Target Pace, then
press A.
4
Press C or D to highlight an entry, then press A.
5
Press C or D to set your target pace per mile or
kilometer, then press A.
Hold down C or D to quickly scroll through the
settings.
46