Connecting The Power Cord - Winnebago 2009 Adventurer Operator's Manual

SECTION 6 –
ELECTRICAL

Connecting The Power Cord

To connect to an external source, remove the
cord from the utility compartment and plug it into
a suitable 50-amp power receptacle to provide
external power to the coach and converter/
charger system.
NOTE: Some parks do not have 50-amp service
available, so you will need to connect to
a standard 30-amp service pole using an
adapter.
50 Amp.
Power Receptacle
A flip-down hatch lets you route the power
cord out the bottom of the compartment so you
can close the compartment door while the power
cord is connected.
1. Flip the hatch downward.
6-2
30 Amp Receptacle
2. Swivel the cover section aside to reveal cord
notch.
3. Route the cord through the notch and flip the
hatch back up into place and close the
compartment door.
NOTE: Always keep service access passage
closed while utility connection is not in
use.
WARNING
Do not plug the power cord into an outlet
which is not grounded, or alter the plug to
connect to a receptacle for which it is not
designed.
Be sure that all four prongs of the supply
cord are properly plugged into the
receptacle.
Do not connect the power cord to an
extension cord.