Entertainment; Video Selection System - Winnebago 2009 Adventurer Operator's Manual

SECTION 8 – ENTERTAINMENT

VIDEO SELECTION SYSTEM

–If Equipped
The video selection system allows you to
switch the antenna, cable TV, satellite TV system
or VCR/DVD signal to any TV set location in the
coach.
This means one person can watch a program
coming in on the roof antenna on the bedroom
TV while another person watches a satellite or
cable TV program or video on the front TV.
To Watch Broadcast TV (Antenna)
• Press TV ANT button on MAIN TV section of
Video Selection System panel.
To Watch Cable TV
• Press CABLE TV button on MAIN TV
section of Video Selection System panel.
To Watch Satellite TV (Dish)
-If Equipped
• Press SAT button on MAIN TV section of
Video Selection System panel, or
• Connect satellite receiver to accessory
connection cables (provided in the prep area).
Accessory Connection Cables
• On TV remote control, press INPUT or
SOURCE button and select either
COMPOSITE (for standard definition) or
COMPONENT (for high definition).
The TV will display the satellite logo when
the correct input is selected.
See TV manufacturer's information in your
InfoCase for further information.
To Watch DVD
• See "Audio-Video System Basic Operation"
elsewhere in this section for basic DVD and
home theater setup.
To Watch VCR (if self-installed)
• Press VCR button on MAIN TV section of
Video Selection System panel.
To Watch Rear/Bedroom TV
(if equipped)
• Video selection for the rear TV is similar to
front TV viewing except all selections are
made with buttons in the TV2 grouping.
VCR Group Buttons
• The buttons in the VCR group are for
selecting the signal input to a self-installed
VCR for taping programs.
8-1