SECTION 9 – FURNITURE AND SOFTGOODS
LOUNGE CHAIR BASE CLAMP
While the vehicle is in motion, the base of the
lounge chair must be fastened into position with
a clamp on the floor as shown.
Typical chair base clamp – yours may differ in appearance.
When the vehicle is parked, you can unscrew
the knob and remove the clamp to position the
chair away from the wall.
CAUTION
The chair must be clamped back into
place and the glide mechanism locked (if
equipped) before traveling.
SLEEPING FACILITIES
WARNING
Do not use sleeping facilities while vehicle
is moving.
DINETTE/BED CONVERSION
(Dream Dinette
™
Mechanism)
–If Equipped
(Typical view – your coach may differ)
Dinette to Bed
1. Release the lock rod on the bottom of the
dinette table by turning clockwise (left).
2. Lift the dinette cushions upward and push
table straight down.
Table
9-1