Programmable Mixing "Prog Mix - FUTABA 4GRS Instruction Manual

Programmable Mix "PROG MIX"
This function allows you to apply mixing between the steering, throttle, channel 3 and
channel 4.
Additional Functions
-When the steering or throttle channel is the master channel (channel that applies mix-
ing), trim data can be added. (Trim mode)
- The mixing mode selection. (Master mixing mode)
Relating function
steering :EPA, STR EXP, D/R, SPEED, 4WS
throttle
CH3
CH4
Movement of the slave channel side
The movement of the slave channel will be in proportion to the movement of the master
channel.
Display "PROG MIX" screen by the following method:
(HOME screen)
Program mixing adjustment
(Preparation)
- When "PROG MIX" is turned ON and OFF by switch, set
the switch by select switch dial function.
1
(Mixing function ON/OFF)
Select the setting item "MODE" using the (JOG) button up or
down operation. Use the (+) or (-) and set the function to the
"ON" or "OFF" state.
"INH" : Function OFF
"ON" : Function ON. When the switch is OFF, "OFF" is displayed.
78
:EPA, THR EXP, ATL, ABS, SPEED, BRAKE MIX, NT-BRK, ESC MIX, TH ACCEL
:EPA,BRAKE MIX,4WS
:EPA,BRAKE MIX,ESC MIX
(MENU 1 screen)
Press
Press
Setup items
MODE : Function ON/OFF
LEFT : Mixing rate (Left side)
RGHT : Mixing rate (Right side)
MST : Master channel
Programmable Mix "PROG MIX"
(MENU 2 screen)
Select
"PROG MIX "
SLV
MXMD
TRIM
(All channels)
(PROG MIX screen)
Press
Press
: Slave channel
: Mix mode
: Trim mode
Function SW
PROGMIX
Function ON/OFF (MODE)
INH,ON(OFF)
Select button
- Select with the (+) or (-) but-
tons.