Display When Power Switch Is Turned On - FUTABA 4GRS Instruction Manual

Display When Power Switch Is Turned On

Battery voltage display
Model number
Model name (10 characters)
The current receiver mode is
displayed.
Telemetry data
LCD Screen Contrast
The LCD screen contrast can be adjusted.
Caution
Do not adjust the contrast so that the LCD is too bright or too dark.
When the display cannot be read due to a temperature change, data cannot be set.
Alarm Setting if Tx is left switched ON
When the steering stick, throttle stick, push switch, or edit button are not operated for 10
minutes (default), an alarm sounds and "NOT OPERATED FOR A LONG
TIME" is displayed on the LCD screen.
When the steering stick, throttle stick, push switch, or edit button are
operated, the alarm is reset. If the system is not to be used, turn off the
power.
The function can be deactivated in the system menu.
Power switch turned on
Beep confirmation sound is generated and the
HOME screen shown below appears.
Telemetry function :ON/OFF
Receiver -> Transmitter:
The reception strength is shown.
ST :Steering trim display
TH :Throttle trim display
D/R :Steering D/R display
ATL :Throttle ATL display
Servo operation of each
channel can be checked.
21