Mechanical Throttle Stick Stroke Adjustment - FUTABA 4GRS Instruction Manual

Mechanical Throttle Stick Stroke Adjustment

Make this adjustment when you want to reduce the throttle stick range at the full
power or brake/reverse positions.
Stick stroke adjustment
1
Make this adjustment by turning the adjusting screw
above the stick with a Phillips screwdriver.
• When the adjusting screw is turned counter clockwise, the
stroke is reduced.
Stroke can be reduced mechanically.
2
On the MENU2 screen, select the
setting item "ADJUSTER" using the
(JOG) button, and pressing the (JOG)
button.
3
(Selection of THROTTLE)
Move the cursor to "THROTTLE"
using the (JOG) button up or down
function, and pressing the (JOG)
button.
4
(Throttle 5:5 neutral adjustment )
Neutral adjuster is set to 5:5 the Neutral Adjuster switch (see
next page). In the 5:5 neutral setup screen (fig-1) state, pull the
stick back slightly then allow to return to neutral and press the
(JOG) button whilst ensuring the stick is not touched.
5
(Throttle 7:3 neutral adjustment )
Neutral adjuster is set to 7:3 by the Neutral Adjuster switch (see
next page). In the 7:3 neutral setup screen (fig-2) state, pull the
stick back slightly then allow to return to neutral and press the
(JOG) button whilst ensuring the stick is not touched.
Note that both the 5:5 and 7:3 neutral adjustment procedures
have to be completed as part of the set-up process. Once com-
plete the required option should be selected.
6
(Throttle throw adjustment)
In the throw setup screen state (fig-3), gently move the stick fully
to the brake /reverse and full power positions and when button
Brake (reverse) side
High side
HOME MENU1
MENU2
ADJUSTER
[ RT ]
＊STEERING
＊THROTTLE
Push
Select Select
ADJUSTER THROTTLE
Push
ADJUSTER ADJUSTER
THROTTLE THROTTLE
N5 5 N5 5
N7 3
CANCEL CANCEL
Ke y Ke y
fig-1 fig-2
ADJUSTER ADJUSTER
THROTTLE THROTTLE
N5 5 N5 5
N7 3 N7 3
BRK BRK
FWD FWD
CANCEL CANCEL
Ke y Ke y
fig-3 fig-4
27